10Watts Outdoor 1900MHz Signal Booster Waterproof

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Outdoor Repeater PCS1900mhz Network Output 10watts

ST Signal Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low-power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Main Features of ST Signal Repeater

High linearity PA; High system gain;

Intelligent ALC technology;

Full duplex and high isolation from uplink to downlink;

Automatic Operation convenient operation;

Integrated technique with reliable performance;

Local and remote monitoring (optional) with automatic fault alarm &remote control;

Weatherproof design for all-weather installation;

Applications of ST ST Signal Repeater

To expand signal coverage of fill signal blind area where signal is weak or unavailable.

Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.

Indoor: Hotels, Exhibition Centers, Basements, Shopping

Malls, Offices, Packing Lots etc.

It is mainly applicable to such case:

The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than-70dBm;

And can meet the requirement of antenna isolation to avoid self-oscillation.

Specification of 10watts PCS 1900mhz Signal Repeater

Frequency	TX: 1850 ~ 1910 MHz
Frequency	RX: 1930 ~ 1990 MHz
Output power	TX: 39dBm±2dBm
Output power	RX: 40dBm±2dBm
ALC control	When in max output power, if increased less10dB input Level, the variation of the output power can be controlled within 2dB , When in max output power, if increased over10dB input Level, the variation of the output power can be controlled within 2dB or shut down repeater
Gain	85±2dB
Gain control range	=30dB
Gain control step and error	Gain control step:1dB Error range:0~10dB, error =±1dB; 10~20dB ,error=±1dB; =20dB, error=±1.5dB
Ripple in band	=2.0dB/3.84MHz(peak value),Ripple in band=4.0dB
Frequency error	=±0.01ppm
Spectral emission	Meet 3GPP TS 25.106 demand
ACRR	Meet 3GPP TS 25.106 demand
Spurious emission	Meet 3GPP TS 25.106 demand

Output intermodulation	Meet 3GPP TS 25.106 demand

Vector range error	EVM=12.5%
PCDE	=-35dB
Noise figure	=6.0dB
Insulation test and prevent self-excitation	Support
Time delay	=5.0us
VSWR	=2.2
Ripple out of band	2.7MHz=f_offset=3.5MHz=70dB
	3.5MHz=f_offset=7.5MHz=70dB
	7.5MHz=f_offset=12.5MHz=45dB
	12.5MHz=f_offset=35dB

Repeater application

To expand signal coverage of fill signal blind area where signal is weak or unavailable.

Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.

Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots, hospital etc.

It is mainly applicable to such case:

The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;

And can meet the requirement of antenna isolation to avoid self-oscillation.

??79.png