4 in 1 Dual Magneto Laser and RF Multifunctional Machine

  • Description
Product Detail

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

7.jpg

8.jpg

9.jpg

10.jpg

Magneto-optical treatment stage:

1) start up:Open the instrument power switch, the instrument display light, the system circuit immediately into the self-test state, the operator in this case should allow the instrument to run their own 5 minutes before proceeding?

Note: If the power switch is turned on and the display is still off, check that the emergency stop switch is reset. Rotate the emergency stop switch in the correct direction to reset the emergency stop switch. The instrument enters the standby mode?

2)Preheating:Preheat the instrument for at least three minutes, do not turn on the lights?

Purpose: to fully circulate the water in the water pipe, so as to avoid the smooth circulation of many times caused by bald gun phenomenon, to ensure the safety of operation?

3)shave:Scrape off the face of excess hair, forehead, eyebrows, two sideburns, cheeks, lips and other hair. (Two minutes)

Purpose: hair is black, the operation will absorb part of the black light, the skin will absorb the light will be reduced, reducing the nursing effect; black hair absorption process will increase the care of the tacit taste, so to scratch the hair ; If not scrape the hair, absorb the light of the small fluff will remain in the skin epidermis part of the heat, may increase the skin's sensitivity?

4)Coated with gel:Magneto-care is a gel;

In the care items, care parts must be evenly coated 2-3mm thick cold gel (two minutes) (If the hair removal project need to scratch the hair (slightly stay a little) and then coated with cold gel)?

5)Eye protection:Require the caregiver to close his eyes and cover the eyes with wet cotton or professional goggles?

Role: to avoid the caregiver to see the light and tension, play a role in appeasement?

6)Check allergy:Adjust the safety parameters at the ear root to do two to three spots, observe the three minutes?

Action: Do not continue to operate?

7)operating:Reconfigure the parameters for the order of the operation. (Twenty minutes or so)

8)Fumian:After the end of the operation will be cold gel to stay in the face for about 20 minutes, if the care after a larger reflection, red holding time longer cold water or ice water can be applied to the red?

9)Cleaning:With cold water cleaning care parts of the cold gel, apply care after repair products

Care of general skin problems, the first seven days of repair repair water products 7 days, seven days later at night other skin care products normal?


Send your message to this supplier
To:  

Guangzhou Renlang Electronic Technology Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
7 YRS Guangzhou Renlang Electronic Technology Co.,Ltd
China Mainland Favorites
Transaction Level:
Contact Us

* Quantity:

You May Like