Atmel Board

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

MY-SAMA5-CB200 view

Top view)

Rear view

SAMA5D3 MPU overview

SAMA5D3 MPU introduction

SMART SAMA5D3 MPU can provide processing capacity of up to 850DMIPS with power consumption of less than 150mW,which is the best choice for industrial application featuring high performance,low power consumption and sensitiveness to cost.its application includes controlling of panel,smart power facility and barcode scanner,e.g.any device which need high grade connection,enhanced user interface,high safety or to be powered by battery.SAMA5D3 is also the good choice for wearable computing application and mobile application.SAMA5D3 series include components of which support temperature range -40/+105°C and package of 12x12mm BGA324(space as 0.5mm)

SMART SAMA5D3 series can provide processing capacity of up to 50DMIPS at 536 Mhz,it is advanced in the market in terms of power consumption(less than 150mW in working mode,less than 0.2-5mW in low-power mode).it provides powerful and high performance external components and interfaces,including 3 USB ports in high speed,interfaces for GMbps and 10/100 ethernet,dual CAN and TFT LCD controller,camera,3 soft modulators of SDIO/SD/MMC?UART?SPI?TWI,12 bit ADC,32 bit timer and ect.Highly stable and reliable safety and Counterfeit prevention is offered by hardware encrypt engine( such as AES/3DES?TRNG?SHA) and safety leading.free Atmel Linux? distribution,Android distribution package,Qt SDK and a full set of C example for non-operating system users are attached with these components.SOM(module system),PMIC(power management IC),memory and kits from different software and hardware partners will make this item more completed.

SAMA5D3 advantage

· ARM Cortex-A5 kernel runs at 536MHz (850DMIPS)

· floating point arithmetic unit is used for high precise calculation and fast data process

· superior low-consumption is leading in the market

· with all external devices activated,it can provide up to 536MHz working frequency with less than 150mW(in working mode)

· with SRAM and register,power consumption is as low as 0.5mW in low-consumption mode

· dual CAN control

· support IEEE1588 Gmbps ethernet MAC and 10/100 MAC

· 3 HS high speed USB ports(can be configured to 3 hosts or two host+one component port)

· CMOS image sensor interface

· graphic LCD controller,features Image synthesis and superimposition

· AES/3DES hardware encrypt engine and safty leading

· BGA324(15x15,invterval 0.8)package,and small package option BGA(12x12mm,interval 0.5)

· expanded industrial temperature range:-40°C to 105°C

SAMA5D3 diagram

SAMA5D3 block diagram

SAMA5D3 MPU difference

SAMA5D36 critical parameter

Parameter	Value
Pin Count:	324
Max. Operating Freq. (MHz):	536 MHz
CPU:	Cortex-A5
Max I/O Pins:	160
Ext Interrupts:	160
USB Transceiver:	3
USB Speed:	Hi-Speed
USB Interface:	Host, Device
SPI:	6
TWI (I2C):	3
UART:	7
CAN:	2
LIN:	4
SSC:	2
Ethernet:	2
SD / eMMC:	3
Graphic LCD:	Yes
Camera Interface:	Yes
ADC Channels:	12
ADC Resolution (bits):	12
ADC Speed (ksps):	1000
Resistive Touch Screen:	Yes
Crypto Engine:	AES/DES/SHA/TRNG
SRAM (Kbytes):	128
External Bus Interface:	1
DRAM Memory:	DDR2/LPDDR/LPDDR2
NAND Interface:	Yes
Temp. Range (deg C):	-40 to 105
I/O Supply Class:	1.8/3.3
Operating Voltage (Vcc):	1.08 to 1.32
FPU:	Yes
Timers:	6
Output Compare Channels:	6
Input Capture Channels:	6
PWM Channels:	4
32kHz RTC:	Yes
MPU / MMU:	No / Yes
Quadrature Decoder Channels:	0
Video Decoder:	No

MY-IMX6-CB200 configuration hardware configuration

CPU	SAMA5D3x	industrial/expansion
memory	256MB	up to 512MB
storage	256MB	support up to 2GB
SPI Flash	2M	support programming
boot mode	SPI boot	ensure the stability and reliability of products

working temperature range

Industrial grade: -40°C ~ 85°C

Industrial expansion grade: -40°C ~ 105°C

operation system support

kernel: Linux-3.18

interface:command line,

model command

name of model

MY-SAMA5-CB200-MPU specification-memory capacity-storage capacity

MPU specification

D36ACN, D36ACNR:industrial expansion

D36ACU, D36ACUR: industrial

memory capacity

256MB: 256G memory

storage capacity

256MB: 256G storage

example of model

MY-SAMA5-CB200-D36ACN-256M-256M

MY-SAMA5-CB200 definition

No.	Pin	Default signal	Default Interface	Multiplex	Multiplex	Default Interface	Default signal	Pin	No.
1	GND_POWER							GND_POWER	2
3	PC1	ETX1	EMAC	TIOB3	LCDDAT19	MCI2	MCI2_DA0	PC11	4
5	PC8	EMDC		TCLK5	LCDDAT18\|TIOA1		MCI2_DA1	PC12	6
7	PC3	ERX1		TIOA4	LCDDAT21\|PCK2		MCI2_CK	PC15	8
9	PC6	ERXER		TIOA5	LCDDAT17\|TIOB1		MCI2_DA2	PC13	10
11	PC4	ETXEN		TIOB4	LCDDAT20		MCI2_CDA	PC10	12
13	PC7	EREFCK		TIOB5	LCDDAT16\|TCLK1		MCI2_DA3	PC14	14
15	PC0	ETX0		TIOA3		SSC0	RK0	PC19	16
17	PC2	ERX0		TCLK3			TF0	PC17	18
19	PC5	ECRSDV		TCLK4			RF0	PC20	20
21	PC9	EMDIO					RD0	PC21	22
23	PC30	UTXD0	UART0	ISI_PCK			TK0	PC16	24
25	PC29	URXD0	UART0	ISI_D8\|PWMFI2			TD0	PC18	26
27	GND_POWER							GND_POWER	28
29	PC31			PWMFI1\|FIQ		LCDC	LCDVSYNC	PA26	30
31	PC23	SPI1_MOSI	SPI1			LCDC	LCDDISP	PA25	32
33	PC25	SPI1_NPCS0						GND_POWER	34
35	PC22	SPI1_MISO				LCDC	LCDHSYNC	PA27	36
37	PC24	SPI1_SPCK						GND_POWER	38
39	PC28	SPI1_NPCS3		ISI_D9\|PWMFI0		LCDC	LCDDEN	PA29	40
41	PA4	LCDDAT4	LCDC				LCDDAT2	PA2	42
43	PA10	LCDDAT10					LCDDAT15	PA15	44
45	PA14	LCDDAT14			ISI_D1		LCDDAT17	PA17	46
47	PA12	LCDDAT12					LCDDAT1	PA1	48
49	PA24	LCDPWM					LCDDAT0	PA0	50
51	PA22	LCDDAT22		ISI_D6\|PWMH1			LCDDAT3	PA3	52
53	PA28	LCDPCK					LCDDAT8	PA8	54
55	PA20	LCDDAT20		ISI_D4\|PWMH0			LCDDAT6	PA6	56
57	PA21	LCDDAT21		ISI_D5\|PWML0	ISI_D2\|TWD2		LCDDAT18	PA18	58
59	PA23	LCDDAT23		ISI_D7\|PWML1	ISI_D0		LCDDAT16	PA16	60
61	PA5	LCDDAT5			ISI_D3\|TWCK2		LCDDAT19	PA19	62
63	PA7	LCDDAT7					LCDDAT11	PA11	64
65	PA30	TWD0	TWI0	URXD1\|ISI_VSYNC			LCDDAT9	PA9	66
67	PA31	TWCK0	TWI0	UTXD1\|ISI_HSYNC			LCDDAT13	PA13	68
69	PD31			PCK1\|AD11	ISI_D10\|SPI1_NPCS2	TWI1	TWCK1	PC27	70
71	PD30	PCK0	SSC0:CLK	AD10	ISI_D11\|SPI1_NPCS1	TWI1	TWD1	PC26	72
73	PD29	AD9	AD			MCI0	MCI0_DA3	PD4	74
75	PD28	AD8					MCI0_DA1	PD2	76
77	PD27	AD7					MCI0_CDA	PD0	78
79	PD26	AD6					MCI0_CK	PD9	80
81	PD23	AD3					MCI0_DA2	PD3	82
83	PD22	AD2					MCI0_DA0	PD1	84
85	PD24	AD4			PWML2\|TIOB0		MCI0_DA5	PD6	86
87	PD21	AD1			PWML3		MCI0_DA7	PD8	88
89	PD25	AD5			SPI0_NPCS2\|CTS0	CAN0	CANTX0	PD15	90
91	PD20	AD0			SPI0_NPCS1\|SCK0	CAN0	CANRX0	PD14	92
93	PD5	PWMH2	PWM	MCI0_DA4\|TIOA0		UART0	TXD0	PD18	94
95	PD7	PWMH3	PWM	MCI0_DA6\|TCLK0			RXD0	PD17	96
97	PD19		GPIO	ADTRG		SPI0	SPI0_MISO	PD10	98
99	PB0	GTX0	GMAC	PWMH0			SPI0_SPCK	PD12	100
101	PB7	GRX3		RK1			SPI0_MOSI	PD11	102
103	PB13	GRXER		PWML3	PWMH3\|GRXDV	GMAC:INTRP		PB12	104
105	PB17	GMDIO			GCOL	CAN0	CANTX1	PB15	106
107	PB11	GRXCK		RD1	GCRS	CAN0	CANRX1	PB14	108
109	PB18	G125CK			GTX7	MCI1	MCI1_DA2	PB22	110
111	PB1	GTX1		PWML0	GRX5		MCI1_CK	PB24	112
113	PB4	GRX0		PWMH1	GTX5		MCI1_DA0	PB20	114
115	PB3	GTX3		TF1	GTX6		MCI1_DA1	PB21	116
117	PB8	GTXCK		PWMH2	GTX4		MCI1_CDA	PB19	118
119	PB9	GTXEN		PWML2	GRX4		MCI1_DA3	PB23	120
121	PB2	GTX2		TK1	G125CKO	USART1	RTS1	PB27	122
123	PB6	GRX2		TD1			RXD1	PB28	124
125	PB5	GRX1		PWML1			TXD1	PB29	126
127	PB16	GMDC			GRX7		CTS1	PB26	128
129	PB25			SCK1\|GRX6	RF1\|GTXER	EMAC:INT_N		PB10	130
131	BMS							DIBN	132
133	NRST							DIBP	134
135	TDI					DEBUG	DTXD	PB31	136
137	JTAGSEL					DEBUG	DRXD	PB30	138
139	TCK	SWCLK			SPI0_NPCS3\|RTS0	SSC0:IRQ		PD16	140
141	TMS	SWDIO						GND_POWER	142
143	TDO					USBA	DHSDP	HHSDPA	144
145	NTRST						DHSDM	HHSDMA	146
147	WKUP					USBB		HHSDPB	148
149	SHDN							HHSDMB	150
151	D7		EBI:Dx			USBC		HHSDMC	152
153	D6							HHSDPC	154
155	D5				LCDDAT23\|TIOB2	EBI	NCS2	PE28	156
157	D4				LCDDAT22\|TIOA2		NCS1	PE27	158
159	D3				USART2:CTS2		A23	PE23	160
161	D2				USART2:RXD2		A25	PE25	162
163	D1				USART2:TXD2		NCS0	PE26	164
165	D0						A20	PE20	166
167	PE3	A3	EBI:Ax	GPIO:LED	USART2:RTS2		A24	PE24	168
169	PE5	A5			TCLK2		NWR1/NBS1	PE29	170
171	PE6	A6			USART3:RXD3		A18	PE18	172
173	PE13	A13			USART3:TXD3		A19	PE19	174
175	PE15	A15		SCK3	PWML1\|IRQ	MMC1:VDD_EN		PE31	176
177	PE8	A8			NWAIT	MMC1:CD		PE30	178
179	PE10	A10			GPIO:LED	EBI:Ax	A4	PE4	180
181	PE14	A14			GPIO:LED		A2	PE2	182
183	PE16	A16		CTS3	GPIO:LED		A1	PE1	184
185	PE0	A0/NBS0					A7	PE7	186
187	PE11	A11			RTS3		A17	PE17	188
189	GND_POWER						A9	PE9	190
191	GND_POWER						A12	PE12	192
193	GND_POWER							VCC_3V3	194
195	GND_POWER							VCC_3V3	196
197	GND_POWER							VCC_3V3	198
199	GND_POWER							VCC_3V3	200

SAMA5D3 MPU introduction

SAMA5 main features

high performance
SAMA5 series is designed an an improvement for ARM Cortex-A5 in terms of insufficient power,its components can provide processing capacity up to 945DMIPS at power consumption less than 150mW

· *1.58 DMIPS/MHz ARM Cortex-A5 kernel

· the maximum working frequency(945DMIPS) is upt to 600 MHz

· 64bit internal bus architecture,32bit DDR controller which can offer band width of up to 1600 MB/s

· Neon and floating point calculation unit is used for highly precise calculation and fast data process

· capability of ARM Cortex-A5 FPU is 3 times higher than that of ARM Cortex-A8 FPU

· L2 cache,is used to improve performance of the whole system

low power consumption

· SAMA5 components can lower effectively power consumption in all modes by applying innovative technology and fulfill following objectives:

· with all external devices activated,it can provide up to 536MHz working frequency with less than 150mW(in working mode)

· in low power consumption mode with SRAM and register kept,the power consumption is as low as 0.5mW and waking up takes only less than 0.5ms.in backup mode of RTC(real time clock),the power consumption is about 1.2µA

· the best choice for the systems powered by battery

connectivity
SAMA5 components embed various kinds of high class communication external devices,so it is the best choice for network bridge and gateway

· support IEEE1588 ethernet MAC and Gbps ethernet MAC,dual CAN ports

· can be configured to 3 hosts or two host+3 high speed USB interfaces of one component port

· multiple SDIO/SD/MMC interface?UART?SPI?TWI?soft modulator?CMOS image sensor interface?ADC?32 timer and ect. please refer to "component overview" tab for more details.

enhanced user interface

· you can create upt to date user interface in fashionable,stable style with SAMA5 MPU.

· graphic LCD controller features synthesis and superimposition of image and integration( such as ablend,zoom,color transform and rotation)

· 720p hardware video decoder is used to support playback of vedio in current main stream standard

· resistance touch screen interface

· CMOS image sensor interface

Safe
safety of SAMA5 series incudes functions of preventing copy,ensuring facticity and protecting application communication and data storage

satefy boot

· hardware encrypt engine,such as high class encrypt standard(AES)/triple data encription standard (DES)?RSA (Rivest-Shamir-Adleman) and ECC(elliptic curve crypto) and secure hash algorithm(SHA) and true Random number generator(TRNG)

· immediately encrypt code/decode through external DDR memory

· detect tamper of pin, to protect system from physical intruding

· cipher key and data safe storage

· ARM trusted area is for the partition among system,peripherals and internal resources to isolate the main software related to safety with environment operating system

safety
functions possessed by SAMA5 can meet easily with the safety standard such as IEC61508

· main crystal oscillator cock can work as a fault detector

· power on and reset

· independent watch dog timer

· writing protection of register

· memory management unit allow a setting of zone prorection in the memory

· ICM(monitor of integrity) based on SHA is used to verify integrity of content in memory

· Arm trusted zone

low cost of system

· SAMA5 realize the purpose of maximum flexibility and the the same time reducing demands for other expensive components by high integrity of system

· 0.8mm ball spacing package simplify PCB design and lower cost

· scheme for minimum low consumption need Chip discrete power and low cost

· 3 high speed USB ports help to save the cost for external integrator

· impedance control on memory circuit of DDR(dual data rate) save external resistors

· embedded RTC save external components

· solution with soft modulator integrated save cost for adding external modulator

SAMA5D3 Features

Core

· ARM Cortex-A5 Processor with ARM v7-A Thumb2? Instruction Set

· CPU Frequency up to 536 MHz

· 32 Kbyte Data Cache, 32 Kbyte Instruction Cache, Virtual Memory System Architecture (VMSA)

· Fully Integrated MMU and Floating Point Unit (VFPv4)

Memories

· One 160 Kbyte Internal ROM Single-cycle Access at System Speed, Embedded Boot Loader: Boot on 8-bit

· NAND Flash, SDCard, eMMC, serial DataFlash?, selectable Order

· One 128 Kbyte Internal SRAM, Single-cycle Access at System Speed

· High Bandwidth 32-bit Multi-port Dynamic RAM Controller supporting 512 Mbyte 8 bank DDR2/LPDDR/LPDDR2 with datapath scrambling

· Independent Static Memory Controller with datapath scrambling and SLC/MLC NAND Support with up to 24-bit Error Correcting Code (PMECC)

System running up to 166 MHz

· Reset Controller, Shut Down Controller, Periodic Interval Timer, Watchdog Timer and Real-time Clock

· Boot Mode Select Option, Remap Command

· Internal Low-power 32 kHz RC Oscillator and Fast 12 MHz RC Oscillator

· Selectable 32768 Hz Low-power Oscillator and 12 MHz Oscillator

· One 400 to 1000 MHz PLL for the System and one PLL at 480 MHz optimize d for USB High Speed

· 39 DMA Channels including two 8-channel 64-bit Central DMA Controllers

· 64-bit Advanced Interrupt Controller

· Three Programmable External Clock Signals

· Programmable Fuse Box with 256 fuse bits, 192 of them available for Customer

Low Power Management

· Shut Down Controller

· Battery Backup Registers

· Clock Generator and Power Management Controller

· Very Slow Clock Operating Mode, Software Programmable Power Optimization Capabilities

Peripherals

· LCD TFT Controller with Overlay, Alpha-blending,Rotation, Scaling and Color Space Conversion

· ITU-R BT. 601/656 Image Sensor Interface

· Three HS/FS/LS USB Ports with On-Chip Transceivers

· One Device Controller

· One Host Controller with Integrated Root Hub (3 Downstream Ports)

· One 10/100/1000 Mbps Gigabit Ethernet MAC Controller (GMAC) with IEEE1588 support

· One 10/100 Mbps Ethernet MAC Controller (EMAC)

· Two CAN Controllers with 8 Mailboxes, fully Compliant with CAN 2.0 Part A and 2.0 Part B

· Softmodem Interface

· Three High Speed Memory Card Hosts (eMMC 4.3 and SD 2.0)

· Two Master/Slave Serial Peripheral Interfaces

· Two Synchronous Serial Controllers

· Three Two-wire Interface up to 400 Kbit/s supporting I2C Protocol and SMBUS

· Four USARTs, two UARTs, one DBGU

· Two Three-channel 32-bit Timer/Counters

· One 4-channel 16-bit PWM Controller

· One 12-channel 12-bit Analog-to-Digital Converter with Resistive Touch-Screen function

Safety

· Power-on Reset Cells

· Independent Watchdog

· Main Crystal Clock Failure Detection

· Write Protection Registers

· SHA: Supports Secure Hash Algorithm (SHA1, SHA224, SHA 256, SHA384, SHA512)

· Memory Management Unit

Security

· TRNG: True Random Number Generator

· Encryption Engine

· AES: 256-bit, 192-bit, 128-bit Key Algorithm, Compliant with FIPS PUB 197 Specifications

· TDES: Two-key or Three-key Algorithms, Co mpliant with FIPS PUB 46-3 Specifications

· Atmel? Secure Boot Solution

I/O

· Five 32-bit Parallel Input/Output Controllers

· 160 I/Os

· Input Change Interrupt Capability on Each I/O Line, Selectable Schmitt Trigger Input

· Individually Programmable Open-drain, Pull-up and Pull-down Resistor, Synchronous Output, Filtering

· Slew Rate Control on High Speed I/Os

· Impedance Control on DDR I/Os

Package

· 324-ball LFBGA, 15 x 15 x 1.4 mm, pitch 0.8 mm

· 324-ball TFBGA, 12 x 12 x 1.2 mm, pitch 0.5 mm

Send your message to this supplier

To:

Zhuhai MYZR Technology Co.,Ltd

* Content:

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:

Fill in the quantlty requlred to get the latest price!

To:

*Quantity Needed:

Details: