DR-45-15 LED Din Rail Mounted Power Supply Transformer 110V 220V AC to DC 15V 3A 45W Output

DR-45-5 Din Rail Switching Power Supply 5V 5A 25W Output

Model: DR-45-5

Input Power points: 110V~220V AC
Output Voltage: 5V DC

Output Current: 0~5A

Output Power: 25W

Model		DR-45-5	DR-45-12	DR-45-24
Output	DC voltage	5V	12V	24V
	Voltage tolerance	±2%	±1%	±1%
	Rated current	5A	3.5A	2A
	Current range	0~5A	0~3.5A	0~2A
	Rated power	25W	42W	48W
	Ripple&noise	80mvp-p	100mvp-p	150mvp-p
	DCvoltage ADJ.range	-9%~+10%	±10%	±10%
Input	Voltage range	90~264VAC, 127~373VDC
	frequency	47~63HZ
	AC current	1.0A/110VAC, 0.55A/220VAC
	efficiency	75%	81%	83%
	Inrush current	Cold start current 20A/115VAC, 40A/230VAC
	Leakage current	< 1mA/240VAC
Protection	Over load	Rated output power105%~150% start over load protection
		protection type: hiccup mode, auto-recovery after fault condition is removed
	over voltage	6.8~8.2V	15.6~17.8V	30.6~33.2V
		protection type:cut off output voltage,diode clamp
Environment	Working temp,humidity	-20°C~+60°C, 20%~90%RH
	Storagetemp,humidity	-40°C~+85°C, 10%~95%RH non-condensing
	Withstand vibration	10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
Safety	Withstand voltage	I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC
Fitstandard	Safety standard	Fit UL1012
	EMC standard	EN55022, CLASSA
Others	Dimension	789356mm (LWH)
	Weight/packing	0.3kg/48pcs/15.4kg/0.03m?3;/1.07CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.