Incremental Rotary Encoder E6c2-Cwz6c 500pr

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Basic Info.

Model NO.:E6C2-CWZ6C 500PR	Type:Rotary Encoder
Working Principle:Incremental	Readout Mode:Contact
Operating System:Magnetoelectric Type	Signal Output:Complementary Push-pull Output
Axle Sleeve Type:Empty Type	Installation Form:Axonia
Brand:IDENCODER	Axonia:Clamping Flange Type
Outer Diameter:25mm	Trademark:IDENCODER
Specification:CE	Origin:ShanDong
HS Code:8543709990

Product Description

ID03-66B10-I1176-1P

Specifications

ID03-66B10-I1176-1P Incremental Rotary Encoder 66mm Dia Shaft 8E6C2-CWZ6C 1000P Incremental Rotary Encoder 10mm Dia Shaft 8Product Name: E6C2-C

Product introduction:
Firm& simple
Seal bearing, realize drip-proof and oil-proof performance of IP6f4
Enhance the performance of shaft load resistant, realize radial load of 50N and axial load of 30N.
The cable leading method is slanting, including transverse and back direction.
With protection circuit against reversing connection and load short circuit, improve reliability.
(also has linear driver output) Product Category: Outside diameter 50(slim type) PCB Sensors
1.Encoding method Incremental
2.Power supply voltage 5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)E6C2-CWZ1X 500P/R 2M PCB Sensorsdata sheet

Encoding method	Incremental
Power supply voltage	5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)
Current consumption	160mA DC Max.
Inrush current	Current: approx. 9 A (Time: approx. 0.3 ms)
Resolution (Single turn type)	500 P/R
Output phases	A, -A, B, -B, Z and -Z
Control output (Output type)	Line driver output
Control output (Load current)	High level(Io): -20 mA Low level(Is): 20 mA
Control output (Output voltage)	Vo: 2.5 V Min. Vs: 0.5 V Max.
Starting positional point	Equipped
Max. response frequency	100 kHz
Phase difference on output	90 DEG -45 to +45 DEG
Rise and fall times of output	Rise time of output: 0.1 us Max. Fall time of output: 0.1 us Max. (Cable length: 2m, Io: -20mA Is: 20mA)
Starting torque	Room temperature: 10 mN.m Max.
Moment of inertia	3*10-7kg.m2 Max.
Shaft loading	Radial: 50 N Thrust: 30 N
Max. permissible rotation	6000 r/min
Mechanical life expectancy	100 million rotations Min.
Ambient temperature	Operating: -10 to 70 CEL Storage: -25 to 85 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH Storage: 35 to 85 %RH (with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	500 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 500 Hz, 2-mm or 150m/s2 double amplitude for 11 min 3 times each in X, Y, and Z directions
Shock resistance	1000m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP64 Company standard: Oil resistance
Applicable standard (EC Directive (EMC Directive))	EMI: EN50081-2 Emission Enclosure: EN55011 Group 1 classA Emission AC mains: EN55011 Group 1 classA Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Equipped
Connection method	Pre-wired models (Cable length: 2 m)
Material (case)	Zinc alloy
Material (body)	Aluminum
Material (shaft)	SUS420J2
Tightening torque	0.5 N.m Max. (with M4 screw)
Weight (packed state)	approx. 400 g
Accessories	Instruction manual