Interphone Battery

  • Description
Product Detail

If you are checking China interphone battery, two way radio battery manufacturer and supplier, or interphone battery chinese factory, please feel free to contact M-Batt Electronics, we are always at your service.



Nominal Capacity : 1200 mAh

Discharge at 0.5C5A after

standard charge fully.

Nominal Voltage:7.4V

Voltage at end of Discharge4.8V

Charging Voltage:8.5V

AC Impedance =180 mO AC 1KHz

6 Standard Charge: 0.5C5 CC/CV?0.05C cutoff

Charge time :Approx 3.0h.

7 Standard Discharge: 0.5C5 CC?4.8V cutoff

8 Fast Charge:1.0C5 CC/CV ?0.05C cutoff

Charge time:Approx 1.5h.

9 Fast Discharge: 1.5C5 CC?4.8V cutoff

10.Maximum Continuous Charge Current/2000mA

11Maximum Continuous Discharge Current 2000mA

12 7.0V Discharge Capacity /=80%

Operation Temperature Range

Charge : 0~45?

Humidity /60±25%

Discharge : -20~60?

14Storage T/H Range -20~60?/60±25%

15 Weigh/Approx/:105g

16 Product Dimension

Length: 65.5mm(MAX)

Initial dimension

Width: 37.5mm(MAX)

Thickness: 9.4mm(MAX)

Over charge Protection

Over charge detection voltage4.30±0.025V

Over charge detection delay time 1300ms Max



Charging and Discharging

1. Do use suitable charger and charge with specified voltage , current and temperature, humidity.

We strongly recommend the smart battery charger.

  1. Never attempt reverse charging.

  2. Avoid over-charging.

4. Do not discharge the pack under over-discharge voltage.

5. Over-discharging may cause loss of performance, characteristics of the pack function.

6. Mechanical shock protection

7. Otherwise, it may cause shape distortion, leakage, heat generation and/or rupture.


For Safety

1. Do not short-circuit with metal wire, necklace, chains or any conductors.

2. Do not drop the pack from height.

3. Do not twist or bend the pack.

4. Do not disassemble the pack.

5. Do not use the pack when something abnormal is found such as smells,

deformation, discoloration,and so on.

6. When the electrolyte leakage occurs, do not touch the liquid.

7. Do not soak in water or get it wet.

8. Do not have the pack in the hot-temperature (more than 60?).

9. Do not put the pack into fire.

10. Do not crush/nail the pack.

11. Do not apply solder directly to the pack.

12. Do not charge the pack nearby the fire or under the blazing sun.

13. Do not drive a nail into the pack, strike it by hammer, or tread it.

14. Do not give the pack impact or throw it.

15. Do not use the pack for other equipment.




Send your message to this supplier
To:  

Shenzhen M-Batt Electronics Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
Related Searches :
7 YRS Shenzhen M-Batt Electronics Co.,Ltd
China Mainland Favorites
Transaction Level:
Contact Us

* Quantity:

You May Like