SCIENTZ-200F Pharmaceuticals Big Size Freeze Dryer

1. General

Item	Technical data
Total Square	2.25m²
Ability to capture water	25 kg/batch 6.5KW
Power(50Hz/380V)	6.5KW total power not working power Consume power<<18 KWh)
Cooling water	About 5 m³/h(=25?)
Host L×W×H	About 2100mm*1200mm1700mm(Against real drawing )
structure	Whole machine one piece
Total weight	About 1500kg
Compressed air	0.5 ~ 0.6 MPa
Power	3 Phase 5 lines 380V 50Hz
Condenser capacity	50L
Capacity in 24 hours	20L ice
Vacuum pump	· Vacuum pump with flow rate not less than 490 l/minute with exhaust oil filter

2. Chamber

Item	Technical Data
Inner chamber material	AISI 304 AISI 304 stainless steel
Lock method	Manual rotation door lock
Chamber door sealing	Fixed type single way door sealing
Chamber door open position	From right to Left (Against client’s requirement )
Chamber door material	AISI 304 Stainless steel
Chamber roughness	Ra = 0.5 µm
Chamber shape	Rectangle
Heating preservation material	PU integral eps(Suit with environmental requirement )
Outer chamber decoration	AISI 304 stainless steel drawbench plate

3 Shelves

Item	Technical Data
Tray material	AISI 316 stainless steel
Surface roughness	Ra = 0.5 µm
Tray No	5+1
Tray space	100mm
Tray size (LWH)mm	About W450 mm × D600 mm ×H20 mm
Tray refrigerant cooling data	+20?~-40?=60 Minutes (free loading )
Tray refrigerant Heating data	-40?~+20?=60??(free loading )
Tray lowest temperature	-70?
Tray highest temperature	+ 65?
Heating power	3 kW
Tray smoothly	= ±1 mm/m
Protection hurdle	Tray ,metal hose and fluid shunt (wedding )fixed directly ,to ensure that the tray layer in the long time no oil leakage and easy for cleaning ,plate layer of left ,right after all three sides protection article in order to prevent the plate /bottle than the plate
Tray top press	Hydraulic top press

4 Condenser

Item	Technical data
Condenser material	AISI 304 stainless steel
Condenser shape	Cylinder-shaped
Coiler material	ISI 304 stainless steel tube
Coiler shape	Outer coiler
Coiler area	?1.8 m²
Inner surface roughness	Ra = 0.5 µm
Condenser cooling data	+20?~-40?=30min(no loading )
Condenser lowest Tem	-85?
Defrost mode	electric defrosting
Temperature sensor	Platinum resistor
Heating preservation material	PU integral eps(Suit with environmental requirement
Outer chamber decoration	AISI 304 stainless steel drawbench plate