Stepper motor driver in high Voltage with digital microstep

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Product Introduction:stepper motor driver in high voltage with digital microstep

DH3722MA is the new generation high performance fully digital stepper drive which base on 32bit DSP with a advanced algorithm .the power supply range is AC110~220V. it can drive frame 86-130mm 3 phase stepper motor .Ultra low noise and high smoothness at middle/low speed ,and high torque at high speed, which can be applied to different speed control applications. adopt smooth and accurate sinusoidal current vector control technology ,which make motor low heat .

Product Features:stepper motor driver in high voltage with digital microstep

?new generation 32bit DSP

?good smoothness ,low noise ,low heat

?build-in micro step setting

?build-in current setting

?the standstill current can be set to 50%

?opto-isolated differential pulse input

?the response frequency is up to 300KHz

?over voltage , under voltage, over current protection

?support PU+DIR pulse mode and CW/CCW pulse mode

?Support 5V/24V signal (PU DR MF) input

Product Applications:stepper motor driver in high voltage with digital microstep

It can be used in various kinds of machines ,such as cnc router, floating machine, packaging machine,3D printer, labelling machine, cnc milling/lathe, laser cut machine, and so on ,its unique features make it an ideal solution for the applications which require low noise ,low vibration, low heat and high precision

Mounting Dimension(unit:mm)

Product Function:stepper motor driver in high voltage with digital microstep

Current Setting

IM(A)

1.2

1.5

2.0

2.3

2.5

3.0

3.2

3.6

4.0

4.5

5.0

5.3

5.8

6.2

6.5

7.0

OFF

Working Modes

OFF:PU+DIR pulse mode

ON:CW/CCW pulse mode;note:set the mode after power off

D10

OFF: receive external pulse

ON: self-test ,after power on ,the motor run with 30RPM\

Microstep Setting

Pu/Rev

400

500

600

800

1000

1200

2000

3000

4000

5000

6000

10000

12000

20000

30000

60000

OFF

Interface Description

Name	Function	Description
PWR	Power light	When power on ,the green light is on
ALARM	Over current/under voltage/over voltage displaying light	If the drive Over current/under voltage/over voltage the red light is on
24PU+	24Vpulse input VCC	Connect to 24V pulse VCC (support PLC 24V+ )
5PU+	5V pulse input VCC	Connect to 5v pulse VCC
PU-	Pulse input negative	Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each falling edge active. In CW/CCW pulse mode,5PU and PU- are CW input
24DR+	24V direction input VCC	Connect to 24V pulse VCC (support PLC 24V+ )
5DR+	5Vdirection input VCC	Connect to 5v pulse VCC
DR-	Direction input negative	DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; In CW/CCW pulse mode,5DR and DR- are CCW input
24MF+	24V enable input VCC	Connect to +24V signal power supply
5MF+	5V enable input VCC	Connect to +5V signal power supply
MF-	Enable input negative	Enable signal: This signal is used for enabling/disabling driver. High level for enabling the driver and low level for disabling the driver. Usually left UNCONNECTED (ENABLED).
RDY+	Drive ready signal output VCC	Drive ready output signal ,if no fault,this output is off ,if fault, the output is on .after power on , the alarm light will be on 10ms,and the RDY+/RDY will be on too (10ms)
RDY-	Drive ready signal output negative	RDY+,RDY- output current is 50MA,the max voltage is 50VDC
AC	AC power supply input	AC110-220V,the max input power is AC240V
N	NC
U	Motor U	Motor U,
V	Motor V	Motor V
W	Motor W	Motor W

!Note

A: Connect power supply rightly ,can’t exceed 240VAC

B: Please keep the pulse cable from the motor cable and power cable ,in case the interference

C: If the alarm light is on ,please check it after power off

a :the power supply range is 110V—220VAC or not ? b:is there any short on motor wire or others ?

Product Service:stepper motor driver in high voltage with digital microstep

ECON provide technical service from start to end,and will offer one year warranty. Any problem,can send e-mail to our technical engineer and sales,or directly chat on our website.

Payment and Delivery:stepper motor driver in high voltage with digital microstep

ECON supports T/T,Paypal,Western Union to make payment. We can arrange express,air and sea shipment,we have professional team to deal with logistic.

Recommendations:High Voltage 3 Phase digital microstep Stepper Drive for motor's size 86~130mm current under 7.0A

3 Phase Stepper Motor Nema 34 Series

3 Phase Stepper Motor Nema 42 Series

Power Supply

Send your message to this supplier

To:

Shenzhen ECON Technology Co.,Ltd

* Content:

For better quotations, include:

- A self introduction