
Urethane Rod
-
Min Order
1
-
Product Unit
Pieces
-
Origin
China Mainland
-
Payment
- Contact Now Start Order
- Favorites Share
- Description
Product Detail
polyurethane coated wire sieve mesh main properties and characteristics:
1).good wear resistance,long service life,the wear resistance of the steel sieve 3 to 5times,for ordinary rubber sieve more than five times.
2 )maintenance quantity small,polyurethane sieve is not easy to damage,long service life,so can greatly reduce the maintenance quantity and maintenance loss.
3 )the total cost is low,although the same specification (area)polyurethane sieve than stainless steel sieve one-time investment (about two times), poly sieve life is stainless steel sieve 3 to5 times,and repair and replancement less,so the total cost is not high,the ecomomy is also very economical.
4 )Moisture performance and work under the conditions of the water as the medium, and in the case of water, oil, media, the friction coefficient of the polyurethane materials lower, more favorable through the sieve, to improve the screening efficiency, and avoid wet particles adhesion, due to the lower coefficient of friction, wear reduction in service life.
5 )corrosion-resistant, non-flammable, non-toxic and odorless.
6 )mesh sieve unique manufacturing process design, limit size of the particles does not block the sieve.
7 )vibration absorption can be good, strong silencer, can reduce the noise, and make the matter on the screen is not easily broken in the process of vibration.
8 )due to the characteristics of the poly secondary vibration, polyurethane screen panel has since cleaning effect, so high screening efficiency.
9 )saving energy,poly proportion small,much lighter weight than the same size steel sieve,and thus reduce the load on the screening machine,saving power consumption and extend the machine life.
Material: |
Casting Polyurethane |
Surface: |
Smooth/Smooth |
Tensile Strength: |
25-55Mpa |
Shock Elasticity: |
>=30% |
Hardness: |
40-90Shore A |
Density: |
1.12-1.25g/cm3 |
Tear Strength: |
55-155KN/m |
Elongation: |
460%-650% |
Akro Abrasion Loss |
<0.05cm3/1.61km |
Working Temperature: |
120? |
- PTFE White Rod 1 Pieces / (Min. Order)
- Graphite Anode 1 Pieces / (Min. Order)
- Graphite Anode 1 Pieces / (Min. Order)
- Ebonite Rod 1 Pieces / (Min. Order)
- FSTN Graphic LCD 1 Pieces / (Min. Order)
- Cadmium Rod 1 Pieces / (Min. Order)
- Turquoise Rayon 1 Pieces / (Min. Order)