Fast Curing Structural Epoxy Adhesive

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

If you are planning to wholesale best cheap and high quality fast curing structural epoxy adhesive China, or hot sale fast curing structural epoxy adhesive in China from professional fast curing structural epoxy adhesive manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

High Tensile Fast Curing Epoxy Adhesive SE2211

?Detailed Product Description

SE2211 is epoxy adhesive with high tensile and high curing speed

Features

1.Resistance of moisture, pollution and other atmospheric constituent

2.High tensile, excellent adhesive property

3.Excellent pollution resistance, the demand of preprocess is low

4.No solvent, no curing by-products

5.Wonderful anti-temperature (-50?~150?)

6.Excellent adhesive performance with fiberglass and metal sheet

7.Have passed the UL certification

Use

For SMC FRP bonding, aluminum honeycomb pane splicing, transformer motor core bonding, Nomex paper bonding etc.

?Data Table

Properties before curin
Part	A	B
Appearance	Black thick paste	Off-white thick paste
Density, g/cm3(25?)	1.35	1.35
Mixture/mass ratio, weight	100:100
Mixture/mass ratio, volume	100:100
Viscosity after mixing, mPa.s (25?)	Thixotropy
Density after mixing, g/cm3(25?)	1.35
Operation time after mixing, min(25?)	10
Preliminary curing time,?/min	60/20 or 25/70
Properties after curing
Hardness, Shore D	90
Tensile-shear strength Mpa ,Al/Al	17
Heat conductivity, W/mK	0.4
Expansion parameterµm/(m,?)	44
Water absorption 24h,25?,%	<0.3
Dielectric strength, KV/mm,25?	>20
Loss factor(1 MHz)	0.014
Dielectric constant (1 MHz)	3.53
Volume resistance DC500V, O·cm	1.2×10¹⁵

Note:

?All data above were tested under standardized condition.

?All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.

?Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing

?Operation

1. Buckets of A and B material is recommended to be stirred before using the components of A/B , A, B should be paid attention to seal preservation after using .

2.Stirring should pay attention to the same direction, otherwise there will be mixed with too many air bubbles; Container frame and bottom of the rubber should also stir evenly, otherwise there will be a local not curing phenomenon caused by the mixing inequality

3.The temperature is too low will cause the curing speed slow, when unable to reach initial strength , constant temperature control required on site.

4.Cartridge packaging use midway need to keep the material mouth sealed.

5.This curing process of adhesive is exothermic reaction , the adhesive quantity will affect the duration of operation, thus the operating time with 100 g adhesive is only a reference time.

?Package and Storage

Package Storage

Part A : 20kg/bucket , 310ml/cartridge Seal and Avoid light and light

Part B: 20kg/bucket or 310ml/cartridge Temperature=25?, humidity=50%RH

Customized packaging Shelf life: Part A 12months, Part B 12 months

?Safety Operation Material

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center sepuna@sepuna.cn, or call +86-400-882-1323.

?Product Warranty

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.

Send your message to this supplier

To:

Shanghai Sepna Chemical Technology Co.,Ltd

* Content:

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity: