Transparent Fast Curing Structural Epoxy

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

If you are planning to wholesale best cheap and high quality transparent fast curing structural epoxy China, or hot sale transparent fast curing structural epoxy in China from professional transparent fast curing structural epoxy manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.

Fast Curing Transparent Epoxy Adhesive SE2617

?Detailed Product Description

SE2617 is epoxy adhesive with very high tensile and high curing speed

Features

1.Resistance of moisture, pollution and other atmospheric constituent

2.High tensile, excellent adhesive property

3.Excellent pollution resistance, the demand of preprocess is low

4.Solvent free, no by-product in curing

5.Stable mechanical and electricity in -45?~120?

6.Excellent adhesive performance with fiberglass and metal sheet

Use

Bonding metal, glass, plastic, paper, rubber, fabric, etc.

?Data Table

Properties before curing
Part	2617A		2617B
Component	polysiloxane		Hydrogen polysiloxane
Appearance	Transparent thickliquid		Pale yellow thickliquid
Viscosity, mPa.s(25?)	10000-12000		5000-8000
Density, g/cm3(25?)	1.1		1.1
Mixture/mass ratio	A:B = 100:100
Viscosity after mixing, mPa.s (25?)	9000-11000
Operation time after mixing, min(25?)	2min
Preliminary curing time(min)	5
Properties after curing
Hardness, Shore D		80
Shear strength, Mpa,Al/Al		10
Shear strength, Mpa, Fe/ Fe		12
Expansion parameterµm/(m,?)		44
Water absorption 24h,25?,%		<0.3
Dielectric strength, KV/mm		>20
Loss factor(1 MHz)		0.014
Dielectric constant (1 MHz)		3.53
Volume resistance DC500V, O·cm		1.2×10¹⁵

Note:

?All data above were tested under standardized condition.

?All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.

?Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’storing

?Operation

1.Mix Part A and Part B by 1:1 evenly, seal the parts after using.

2.Stirring by one direction for avoiding the bubbles; the frame and bottom also need to be stirred evenly, or it will cause not cure situation.

3.Low temperature will slow the curing speed, if the primary strength can’t get, the application environment needs to do constant temperature control.

4.Taking care of the material mouth seal in using

?Package and Storage

Package Storage

Cartridge: 2*25ml Seal and Avoid light and light

Barrel: 2*1KG Temperature=25?, humidity=50%RH

Shelf life: 12 months

?Safety Operation Material

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center sepuna.@sepuna.cn , or call +86-400-882-1323.

?Product Warranty

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.

Send your message to this supplier

To:

Shanghai Sepna Chemical Technology Co.,Ltd

* Content:

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity: