Shunt

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Shunt
The Fangpusun PA HS200 is a highly intelligent current sensor with extremely low own consumption.
The Fangpusun PA HS200 comes into play when (e.g.) an inverter is directly connected to the battery and the Fangpusun Tarcom or Power Tarcom charge controller cannot measure the current consumption. A shunt is also required when an additional generator (e.g. PV, wind ordiesel) directly charges the battery without being connected to a Fangpusun Tarcom charge controller.
The current is measured contact-free via a Hall-effect sensor.
The data is transmitted to the charge controller over a cable connection. Up to two Fangpusun PA HS200 shunts can be connected and the measured current can be selectively added to the charging current, battery current or load current as desired.
Product features
Automatic detection of voltage
Wide current measuring range
Potential free current measurement
Communicates and stores data in the Fangpusun PA Tarcom
Integrated Hall sensor
Displays
LED shows operating states
Messages via Fangpusun Tarcom LCD display
Interfaces
Two RJ45 cable sockets
Modes of operation
“Battery”: measures currents which flow through the battery cable
“Load”: measures currents of external loads not connectedto the charge controller
“Charge”: measures currents of back-up generators
Certificates
Compliant with European Standards(CE)
ROHS compliant
Made in china

PA HS200
Characterisation of the operating performance
System voltage	10V…65V
Own consumption	<9mA
Measurement accuracy	(-20A…+20A)+/-1% (-200A…+200A)+/-3%
Operating conditions
Ambient temperature	-15?…+50?
Relative humidity	75%
Fitting and construction
Current range “battery” mode	-200A…+200A
Current range ”charge” mode	0A…+200A
Current range “load” mode	-200A…0A
Degree of protection	IP 22
Dimension(X x Y x Z)	100x60x25mm
Weight	120g
Max. diameter for battery cable	19mm