YH-170 TDS Organoclay For Coating

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

YH-170 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity.

1. Advantages:

? High gelling efficiency over low, medium and high polarity organic liquids.

? Produce reproducible thixotropic consistency over a wide temperature range.

? High viscosity and excellent thickening property over a wide temperature range.

? Imparts particle suspension, preventing hard settling of pigment and fillers.

? Exerts strong film reinforce action in organic binder systems.

? High purity:high percentage of montmorillonite,free cristobalite <1%.

? High efficiency:save 30%dosage compared with ordinary grades.

? Good dispersion:self-activated in medium/high polar system.Its fineness can reach 10µ or even less.

2. Typical Properties:

Color	Appearance	Density	Moisture (@105?,2hrs)	Fineness through 200 mesh	Loss on Ignition ( @1000? )
Light White	Free Flowing Powder	1.85g/cm3	=3.5%	=99%	=42%

3. Typical Applications:

?Acrylic paint	?Solvent epoxy paint
?Alkyd paint	?Wooden paint
?Baking paint	?Zinc-rich paint
?Decorative paint	?Inks(mineral oil,vegetable oil)
?Industrial paint	?Varnish
?Marine paint	?Lubricating grease
?Non-solvent epoxy paint	?Cosmetics
?Polyester paint

4. Incorporations:

YH-170 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, YH-170 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.

YH-170 can be added at any point in the manufacturing process. If addition is made with polar activator or after grinding,better performance can be expected.

Polar Activator: Dosage of polar activator( such as propylene carbonate, 95%ethanol , acetone or 95% methanol) is 20%-30% by weight of YH-170.

It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.

5. Recommended Levels:

The amount of YH-170 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-0.8% based on the total formulation weight.

6. International Countertypes:

Bentone®SD-1, Bentone®SD-2, Bentone®SD-3, Bentone®1000

Claytone®APA, Claytone®YH, TIXOGEL® MP-100, TIXOGEL® MP-250

Send your message to this supplier

To:

Anji Yuhong Clay Chemical Co.,Ltd

* Content:

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity: